When it comes to Miele appliances, you’re investing in premium quality and cutting-edge technology. These appliances are known for their reliability, but occasionally, even the best may encounter issues, including error codes. That’s where Miele Appliance Support comes in.
Our seasoned technicians specialize in Miele all apliances error codes, offering comprehensive solutions to ensure your appliances functions flawlessly.
Miele Refrigerator Error Codes
| Error Code | Causes |
|---|---|
| nA | Freezer temperature is too high Learn More |
| F0 | Fault in the fresh air Biofresh sensor Learn More |
| F1 | Check the sensor of the refrigerator section for faults Learn More |
| F2 | The evaporator sensor has a fault Learn More |
| F3 | Air sensor of the freezer is faulty Learn More |
| F4 | Failure in the sensor evaporator Learn More |
| F5 | The microprocessor control card is malfunctioning Learn More |
| 01, _F, 21 | Something is stopping the ice from forming and dropping Learn More |
| FE | This is an error code but the exact fault it represents is not clear Learn More |
| Lit Up Alarm and Sensor Symbols and Audible Alarm | These indicators alert you to the fact the door alarm is active Learn More |
Miele Dishwasher Error Codes
| Error Code | Causes |
|---|---|
| F01 | Water or heater thermistor shorted Learn More |
| F02 | Water or heater thermistor open circuit Learn More |
| F11 | Drainage error Learn More |
| F12, F13, F14, and F15 | Water intake error Learn More |
| F18 and F19 | Flow meter error Learn More |
| F24 | Heater relay error Learn More |
| F25 and F26 | Temperature error Learn More |
| F40 and F42 | Electronic error Learn More |
| F51 and F52 | Heater pressure error Learn More |
| F53, F63, F67, F68, and F69 | Circulation pump error Learn More |
| F70 | Float switch error Learn More |
| F84, F85, F86, F87 and F88 | Water quality sensor error Learn More |
Miele Oven Error Codes
| Error Code | Causes |
|---|---|
| F5 |  PT1000 temperature sensor error. Learn More |
| F21 |  Upper heating element error. Learn More |
 F22 |
 Ring element error. Learn More |
 F23 |
 Pyrolysis temperature has not been reached. Learn More |
 F30 |
 Communication error by door and door lock. Learn More |
 F31 |
 Door is open. Learn More |
 F33 |
 Door cannot be opened. Learn More |
| F44 |  Communication error. Learn More |
 F54 |
 Meat thermometer error. Learn More |
| F55 |  Maximum heating time exceeded. Learn More |
| F57 |  Cooling fan error. Learn More |
 F60 |
Insufficient ventilation. Learn More |
 F184 |
Pyrolysis temperature has not been reached. Learn More |
 F189 |
 Maximum heating time exceeded. Learn More |
 F188 |
 Meat thermometer error. Learn More |
Miele Dryer Error Codes
| Error Code | Causes |
|---|---|
| F66 | Ventilation and Dampness Problems Learn More |
| F55 | Time Error Learn More |
| F50 | General Computer Error Learn More |
| F39 | Control Board Failure Learn More |
| F32 | Faulty Door Lock Mechanism Learn More |
| F11 | Draining Issues Learn More |
| F12 | NTC Sensor Learn More |
| F13 | NTC Sensor Learn More |
| F14 | Exhaust Blockage Learn More |
| F16 | Heating System Problem Learn More |
Miele Washer Error Codes
| Error Code | Causes |
|---|---|
| F1/F2 | The NTC sensor has short-circuited due to a problem with the water/heating. Learn More |
| F10 | A water intake fault. Learn More |
| F11 | Water drainage difficulties. Learn More |
| F15 | Heated water intake fault. Learn More |
| F16 | Too much detergent detected. Learn More |
| F19 | Rotation complications resulting from slow flow. Learn More |
| F20 | Water fill issue possibly related to flood safe device. Learn More |
| F29 | Heating steam inactive. Learn More |
| F34/F35 | Unable to lock or unlock the washing machine door. Learn More |
| F39 | Electronic unit failure. Learn More |
| F41 | Incorrect data from faulty electrics. Learn More |
| F43 | Appliance model not programmed correctly. Learn More |
| F45 | Signal failure from the main control unit. Learn More |
| F51 | A level switch or sensor pressure problem. Learn More |
| F56 | The final spin speed is less than 400rpm needed. Learn More |
| F62 | The programme selector is defective. Learn More |
| F63 | The water path control unit has failed. Learn More |
| F65 | The drum lighting cap is missing. Learn More |
| F81 | Steam inactive from the heater unit. Learn More |
| F83 | The heater unit is experiencing excessive temperatures. Learn More |
| F92 | Indicates bacterial / mould growth somewhere. Learn More |
| F100 | A communication link failure. Learn More |
| F104 | Low voltage power to the drive. Learn More |
| F138 | Water detected in the drip tray. Learn More |
| F140 | Drainage dispenser unit faulty. Learn More |